Scientific Laboratory Equipment

These chambers are most useful for carrying out various experiments to study growth of plants and animals under controlled environmental conditions, incubation etc. it has outer wall made of M.S. Sheet duly painted and inner wall made up of heavy gauge aluminum or S.S. Sheet. The gap between inner and outer wall is filled with high-grade glass wool to avoid thermal loss. Besides outer double walled door, a full view inner glass door allows inspection of test samples without disturbing the inner chamber conditions.

Unit is supplied with three adjustable perforated shelves. Temperature range from 50C to 500C + 10C is controlled by dual setting digital temperature indicator cum controller, so as to set two different temperatures for Day and Night. Cap (Standard) : 6/10/12/15/20/30/45 cu ft.

These are test chambers to study different growth pattern on controlled environmental conditions. Heavy duty robust construction with inner chamber made of stainless steel and outer made of M.S.Sheet duly enamel painted. Glass window allows inspection of samples without disturbing the inner chamber temperature. Four stainless steel adjustable shelves are provided with the unit. Air circulation fan is also fitted in the unit for temperature uniformity. Temperature range from 100C to 600C ±10C is controlled by dual setting digital temperature Indicator cum controller and humidity is controlled by imported humidistat from ambient to 95% + 3%RH. Arrangement exists only for increasing the humidity and not for decreasing. Fitted with exterior illumination achieved by fluorescent tube and 0-24 cyclic timer. To work on 220-230 volts AC Supply.

Most suitable for conducting various experiments on a variety of seeds under different conditions of temperature and humidity. Atmospheric conditions are created within the chamber to perform different experiments without going onto the field. The double walled unit has inner chamber made up to anodized aluminum or S.S .and outer chamber of M.S. sheet duly degreased and pre treated with primers for rust proofing painted with attractive stove enamel or powder coated. Temperature from 50C to 600 C ±10C is controlled by solid-state digital temperature controller cum indicator. Humidity(adjustable) is created by a S.S. water reservoir fitted at the bottom to provide 90% to 95% + 3% RH. Supplied complete with 14/28 adjustable perforated trays .Standard chamber size : 555 x 910 x 605 mm (single/dual) or as per customer's.

Most versatile for Biochemical Oxygen Demand determinations. Castor wheel mounted cabinet is double walled with inner chamber of aluminum or S.S. and outer wall of M.S. Sheet duly powder coated. The unit is provided with optimum thermal glass wool insulation. Triple walled back of unit is fitted with two air circulation fans for maintaining temperature uniformly throughout the chamber. Full view inner perspex door permits inspection of specimens, without disturbing the chamber temperature. Lock and Key arrangement is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. Refrigeration unit is formed by ISI marked compressor/cooling kit. The front panel is provided with separate indicator lamps for main, heating and incoming voltage. Supplied complete with 3 shelves, Temperature from 50C to 60C is controlled digitally, with an accuracy of ? 0.50? C. Capacity: (standard): 6/10/12/15 Cu Ft

These are unique high end ice flakes producing equipments for various biotech and general lab applications. A unique machine using state of the art technology to produce hygienic ice flakes. It utilizes the running tap water and starts converting it into flakes (ice) within 15 mins of the operations. These air cooled self contained environmental friendly units have outer and inner construction of SS-304 grade stainless steel, having unique features of high storage bin, auto cut off facility and gear motor protection devices. Our units are most economical and have a production capacity of 100 kg/day and 200 Kg/Day. However custom capacities can be built on request.

This is an excellent equipment for all the laboratories intending to preserve their samples without changing its physical and chemical properties. Housed in a super structure steel frame with removable side panels mounted on wheels castors. Complete with copper coil (Bounded outside) Perspex see through lid, gasket and control instruments i.e. Digital Solid State Temperature Indicator for measurement of Temp. and Electronic Vacuum Indicator. The unit made out of hermetically sealed compressor and with 100 litres / min direct motor drive rotary vane type vacuum pump of double storage with Air ballast having ultimate vacuum of 1x10 torr on pump head Temperature range -400C at ambient temperature of 200C. Condenser Trap: All non-magnetic S.S. fabricated, argon welded, dished bottom for complete effluent removal. Refrigeration coils made of copper bonded to outside of condenser heavily insulated Temp. is adjustable to -400C and is maintained automatically. Vacuum Drum has 12 port manifold ( Main drying chamber ) made of S.S. non magnetic grade with prespex top cover. Capacity : Standard : 3.00/5.00 litres/Hour.

These are the primary requirements of every blood bank and hospital, to preserve and secure the vital supply of blood, plasma and other blood derivatives Mounted on a study angle frame the inner chamber is made up of S.S. and outer of M.S. duly enamel painted. The temperature is maintained 0 with 4 C to 6 C for storing blood bottles or blood bags. Temp. Is controlled by Solid State Digital Indicator-cum-controller and triggers the Audio Visual Alarm in the event of fluctuation exceeding permitted tolerance. Unit is also fitted with door operated alarm and power supply failure alarm, as a safety device. Drawers are provided for holding bags . Standard capacity : 50/110/200/250/360/400 bags. Custom capacity models can also be supplied on request

These are the basic requirement of all the morgues and hospital to preserve cadavers. These are double-walled units with steel panels for outer surface and stainless steel inner chamber with insulation in between, front opening hinged insulated doors lined with magnetic gasket, handle and lock arrangement with keys in duplicate for individual dead, travel on rollers fitted with ball bearings for easy movement. Exterior surface is chemically treated, coated and duly finished with hammer tone paint. To avoid any moving part in side the cabinet for easier maintenance and cleaning viewpoint, refrigeration unit is kept outside the chamber and fixed at near top. Temperature of -2 C to 5 C or -15 C to -20 C is maintained by hermetically sealed environment friendly cooling unit and is controlled through digital indicator. Standard Models: one/two/three four six nine bodies. Custommodels can be fabricated on request)

These test chambers are suitable for carrying out different quality control tests under cont rol led condi t ions of temperature and humidity. Inner chamber consists of anodized aluminum or S.S. and outer wall of M.S. Sheet duly painted. The gap of 75 mm between the outer and inner wall is filled with special grade glass wool to prevent thermal losses. A self-cooled air circulation fan is fitted to maintain uniform temperature and humidity conditions 0 throughout the chamber. Temp. range from 5 C above 0 ambient to 60 C is controlled by electronic digital controller 0 thermostat with an accuracy of ±1 C. Humidity is controlled through an imported HUMIDISTAT, thus controlling the desired set humidity range from atmospheric humidity to 95 % ±3% RH.. Capacity 147 ltr/235 ltr/335 ltr

General Purpose Laboratory freezers are double walled with inner chamber made of S.S. and outer of thick PCRC sheet duly enamel painted. Temperature range from ambient to 0 -20 C is achieved by hermetically sealed compressor. The gap between the inner and outer wall is filled with high grade mineral glass wool to avoid thermal loss. Body is mounted on a study angle iron frame and is mounted on castor wheels. Unit is fitted Solid State Digital Temperature Indicator cum Controller. Vertical models are supplied with three stainless steel storing shelves.
Standard capacity : 4/6/10/12/15 cu ft.

The outer chamber is made up of M.S. sheet duly painted and inner chamber of thick S.S. Sheet. The gap between two walls is filled with high-grade glass wool to avoid thermal loss. The plexi glass window makes it possible to inspect the specimen without disturbing the inner temperature. The lid of chest type unit is fitted with fluorescent tubes of 60 cms. Length, on the inner side. The unit has a temperature range 0^o from 5^oC to 6^oC and is controlled with electronic solid state digital temperature controller cum indicator, with and 0 accuracy of ±0.5 C. Air circulation fan is fitted to maintain temperature uniformly throughout the chamber. Cyclic illumination conditions are controlled by an automatic timer (0- 24 hrs) fitted to the unit. The system is equipped with digital RPM indicator and controller. The shaker has variable speed and a platform containing 16 flasks of 500 ml or 40 flasks of 100 ml or 34 flasks of 150 ml capacity is supplied with the unit as standard accessory.

These are special purpose baths for specific laboratory applications. Mounted on a sturdy angle iron frame the inner chamber is made of thick S.S and outer of mild steel duly enamel painted. The gap between the inner and outer wall is filled with high grade glass wool in order to prevent any loss of temperature. Fitted with ISI marked CFC free compressor for effective cooling. Heating is brought about by immersion 0 type heating elements. Temperature range form 5 C to 0 90 C is controlled by digital temp.controller with an 0 accuracy of ± 0.5 C. A high-speed stirrer is fitted to maintain temperature uniformity. The lid of bath is insulated double walled fixed with hinges and is provided with locking arrangements. Capacity 28/50/75 ltrs (standard).

These are general purpose heating equipments, a must for every laboratory, they are sturdy double walled units with outer chamber made of M.S. sheet pre treated with primers for rust proofing painted with attractive stove enamel or powder coated with inner chamber made up of anodized aluminum or S.S. sheet. The gap between inner and outer chamber is filled with high-grade glass wool to avoid thermal losses. Beaded heating elements made of kanthal A1 wire are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated shelves to convenient height. Temperature is controlled by electronic digital controller/hydraulic thermostat from 5° C above ambient to 250° C ± 1°C. Air ventilators are also provided on the sides of the unit. Capacity (Standard): 28/45/95/125/224/252/336 ltrs.

These are general purpose heating equipments for routine bacteriological applications. These are sturdy double walled units with outer chamber made of M.S. sheet duly enamel painted with inner chamber made up of anodized aluminum or S.S. sheet. The gap between inner and outer chamber is filled with high-grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated shelves to convenient height. The door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test temperature. Temperature is controlled by electronic digital controller/hydraulic thermostat from ambient to 70 C ±0.5 C. Air ventilators are also provided on the sides of unit. Capacity (Standard): 28/45/95/125/224/252/336 ltrs.

These are ideal equipments for various laboratory and industrial applications involving high heat treatment of standard mass. Light weight with ceramic fiber wool insulation (instead of brick insulation). The outer casing is made of double walled thick P.C.R.C. sheet, reattached with thick perforated sheet on the bottom portion, painted with attractive stove enamel. Heating elements are made of Kanthal"a-1"/ Silicon corbide/Ammonium Molybdenum wire and backed by high temperature mineral insulation, which avoids loss of energy. Temperature control unit consists of energy regulator or electronic temperature controller, fitted in front of furnace 0 0 with two pilot lamps. Maximum Temp. is 95 0C/1100 C. 0 0 /1400 C/1600 C. Available in various standard and customized sizes and capacities.

These are ideal heat treatment equipment where a mass have to be heated at a temperature under vacuum. These are double walled cylindrical/rectangular units with outer made of M.S. sheet duly enamel painted and Inner made up of heavy gauge S.S. Sheet. Gap between the two walls is duly filled with high-grade glass wool to avoid thermal loss. Temperature range from 50° C to 150° C is controlled by hydraulic thermostat/ electronic controller with an accuracy of ± 1°C. It is capable of withstanding a high vacuum. Provided with vacuum gauge, see through transparent window of toughened glass and one shelf. Available in capacities ranging from 25 ltrs to 200 ltrs.

The equipment is used for routine uniform heating applications in the laboratory. The body is made of P.C.R.C. sheet duly painted with attractive stove enamel. The top cost iron heating plate is round /rectangular, with heating elements of 1.5 KW-6.0KW rating. Temperature is 0 controlled by energy regulator up to 350 C.Available in different standard and custom sizes.

Used for continuous stirring and heating of viscous liquids. It is a compact stirring device utilizing a rotating magnetic field (created by a permanent magnet), which induces variable speed stirring action. Stirring is accomplished by means of small Teflon rotor, which when placed in the liquid to be stirred is capable of rotation by magnetic field applied from below the container. Cap: 1/2/5/10 litrs.

Most suitable for general scientific labs, for heating inflammable liquids Electric heating net is hard knitted from glass yarn (without any joint) for durability & stands. Temperature up to 350º C, body of mantle is spun one piece from non rusting aluminum (duly stove/powder coated) Mantles are logged with special grade mineral wool. Capacity available from 250ml to 20 liters

An Ideal heater for the extractors of Soxhlet and other units. This apparatus is suitable to heat soxhlet flasks of 50-500 ml. It consists of M.S. sheet housing, two vertical and two horizontal rods with adopters and screws to hold the flasks. To work on 220/230 volts A.C. supply. Unit of 3/6/test Mantle/ Heater Type. To work on 220/230 volts 50 Hz AC supply.

This unique combined unit is supplied complete with two sets of Mantle type heating platforms, one for distillation and one for digestion. The unit is supplied complete with condenser rack, lead fume duct with covered by S.S. frame and pair of hangers. Complete set is supplied on a M.S. Tubular stand. Both units are supplied with individual energy regulators. To work on 220/ 230 volts A.C. supply. Unit of 3/6/test Mantle/ Heater Type.

The equipment has a casted top with room for heating 40 digestion tubes of 75 ml each. Heating elements are speared uniformly so that the entire casted top. And thus the tubes attain the same temperature throughout. Temperature is controlled by energy regulators. The gap between the elements and outer M.S. painted wall is filled with high-grade mineral wool to avoid thermal loss. To work on 220 / 230 volts A.C supply

Our horizontal Laminar air flows are designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 (class conditions) the cabinets are fabricated out of thick board duly sun mica clad/stainless steel/Mil\d steel sheet. Interior surfaces are epoxy painted for its longer life. The worktable is made of stainless steel sheet.. Side panels are made out of thick transparent plexi glass duly framed. The unit is fitted with pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99%. with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced ISI MARKED Motor of 1/5 H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent lights fitted to the unit. Height of the working table provides comfortable "SIT DOWN" working position for the operator.. Supplied complete with manometer, uv light fluorescent light . Standard sizes: 2' / 3'/4'/6'/8'x2'x2'

Our vertical Laminar air flows are designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 (class conditions) the cabinets are fabricated out of thick board duly sun mica clad/stainless steel/Mil\d steel sheet. Interior surfaces are epoxy painted for its longer life. The worktable is made of stainless steel sheet.. Side panels are made out of thick transparent plexi glass duly framed. The unit is fitted with pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99%. with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced ISI MARKED Motor of 1/5 H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent lights fitted to the unit. Height of the working table provides comfortable "SIT DOWN" working position for the operator.. Supplied complete with manometer, uv light fluorescent light . Standard sizes: 2' / 3'/4'/6'/8'x2'x2'

Our chemical fume hoods are fabricated out of thick wooden board these are designed so as to throw-out all toxic / harmful / vapors, thus protecting costly instruments and the person working in the lab. Outer is finished with sun mica and inner epoxy painted. Working tabletop is fitted with acid / alkali resistant tiles and a small washbasin with connections provide for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weight. The unit if fitted with florescent light and a gas cock for gas / air supply. The space under the work station can be provided with storage compartments for storage purpose. The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. Standard sizes 4'/5'/6'/7/8' x 3' x 3'

The cabinets are fabricated out of thick board duly sun mica clad. Interior surfaces are epoxy painted for its longer life. The worktable is made of heavy gauge S.S. sheet and is fitted with U.V Germicidal Light, static pressure Manometer, Exhaust System (suitable for 6 feet duct) and Virus Burn Out Unit. Side panels are made out of thick transparent plexi glass duly framed. The unit is fitted with pre filter and HEPA Filter. Air is drawn through pre filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency retaining all air- borne particles of size 0.3 micron and larger. Using a dynamic balancing machine, the blower and motor assembly is statically and dynamically balanced. Motor of 1/ 4 H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent lighting fitted to the unit. The height of the working table provides a comfortable "SIT DOWN" working position for the operator. Standard Sizes

Completely self-contained pre-wired, fully equipped Personnel Air Shower helps solve decontamination problems of personnel entering into Clean Rooms. "Wheel-in, plug-in and walk in". The operator stands in a closed cubicle, subjected to high velocity H.E.P.A. filtered airflows of between 20-30 m/sec, a force that ensures efficient scrubbing action to the clean room garments to remove particulate matter. The air brushing action is obtained from rows of nozzle jets discharging high pressure air angled to the body. The design of the jets is such that the scavenging air reaches the body of the operator with sufficient force to disturb particles lying on the surface of the garment. Unwanted particles are "skidded off" and not driven more firmly into the clothing's texture. Once airborne, the particles are carried away by the downdraught. The doors of the Air Shower are electrically interlocked to make it impossible to pass through into the Clean Room without undergoing the cleaning cycle. Standard two door walk-through showers, as well as multiple (3 door or more) door units, tunnel air showers and product scavenging showers, are supplied subject to specification requirements (Standard Size 1 mtr x 1 mtr x 1 mtr)

Our sterile garment cabinets are widely used for providing sterile and filtered wash of garments used in hospitals change rooms, storage of sterile garments in controlled environment and also in clean rooms etc. These cabinets may be designed in horizontal air flow system and clean air through HEPA filters, having an efficiency of 99.97% down to .3 micron particle size. These specialized cabinets are available in different sizes and are manufactured using different construction material including stainless steel and PU painted GI. Sterile cabinet ensure a clean storage space by making use of UV disinfectant and heating through IR lamps. Standard sizes : 4'x2'x4', 6'x2'x6', 6'x4'x6'

Our pass boxes are essential for the transfer of work item in and out of the Clean Room in order to minimize airborne particles brought about by human traffic. Our reliable mechanisms prevent both Pass-Through doors from opening at the same time, thereby preventing contamination. Continuous-seam interiors create a hermetically sealed chamber with no cracks or crevices Its ergonomic, chrome-plated Lift Latches eliminate rotary strain on hinges It have a uilt-in UV germicidal light for extra protection. The door at two sides of pass box, allows only one doors to be open at a time magnetic interlocking type doors of pass box. Standard sizes : 15"x12"x12 to 39"x36"x36

Dehumidifiers are water-condensing type, based on "Refrigeration Cycle" to avoid use of expensive chemicals required for desiccant type models. The unit is selfstanding and is mounted on a study angle iron frame, fitted with caster wheels. Dehumidifier removes excess moisture from the atmosphere and it fitted with hermetically sealed compressor. Heat exchanger and water-condensed coils are made of copper. Water collection tank is provided below the unit to collect condensate water. Humidity is controlled by automatic humidisat incorporated in the unit, upto 30% + 3% RH, depending upon the ambient conditions.

The inner chamber, steam jacket, outer chamber and boiler are made of heavy gauge stainless steel with leak proof argon arc welding. The radial locking lid is made of thick S.S. plate. All units are hydraulically tested upto 40 psi. The space between the outer chamber and steam jacket is filled with asbestos sheet or glass wool to minimize thermal losses. Steam boiler is fitted with water level indicator, pressure gauge, low water cutoff device and automatic pressure control device. Fitted with a dial thermometer to indicate inner temperature and vacuum and vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation. Two separate valves are provided for evacuating steam from inner chamber and jackets as and when desired. Available in different standard and custom sizes.

Inner Chamber is made up of thick s.steel of 304 / 316 quality and jacket is made out of rolled s.steel. Single door made of rolled steel lined with S.S. sheet has radial locking system. All units are hydraulically tested upto 40 psi. The space between outer cover made of thick rolled steel sheet and the steam jacket is filled with mineral wool. Boiler is made of thick S.S. sheet and is located under the sterilizer. It is fitted with water level indicator, safety valve, pressure gauge, and water inlet and drain valves. Unit is fitted with low-water cut-off device and automatic pressure control device. Fitted with self locking safety door device. Two separate valves are provided for evacuating steam from inner chamber and jacket, as and when desired. The sterilization cycle is controlled through multiport valve or threeway valve. Fitted with a dial thermometer and automatic vacuum breaker. To work on 440 volts, 3 phase, A.C. supply. Available in different standard and custom sizes.

It is used for sterilization under saturated steam pressure at any selected point between 5 to 20 p.s.i. (adjustable). These are double walled units with inner chamber (Boiler) made of 18 S.W.G. stainless steel and outer chamber is made of SS sheet covered with S.S. Lid with radial locking system. Fitted with neoprene rubber gasket, all systems are hydraulically tested up to 40 p.s.i. as a safety measure. All autoclaves are fitted with standard accessories such as water level indicator, pressure gauge, steam release cock, spring-loaded safety valve and heating element. Supplied complete with S.S. basket and vacuum breaker device, cord and plug, to work on 220/230 volts A.C. Supply.Capacity: 22, 40, 50, 78, 98, 187 ltr

Enclave is fully automatic front loading autoclave with dry cycle. lectronic Circuit inside the autoclave with programmable integrated circuit chip. With dry cycle after sterilization without opening the door. With Digital Display of all the operations in sequence and timer & Temperature. The Front control panel has a touch type key switches and also have LEDs to indicate the operation going inside the autoclave.The autoclave is programmed to perform all necessary operations required in sterilization. With additional solenoids valve provided to shunt out the air from the chamber at the initial stage. The internal chamber have two number of trays made of stainless steel having size 12" x 8". Sealing Ring made of Silicon Rubber. One Sterilization Cycle. Sterilization with dry cycle completes with single touching of start

The coil type heater of high class nichrome wire are embedded in Electronic Grade Transparent Pure Fused Quartz Tubes, and are placed in corning boiler. The unit is supplied with metallic stand, electrical fittings, corning condenser and Automatic cut-off device for safety of heaters. In case water supply is stopped.

The assembly consists of a corning glass flask with embedded heating elements fused in spiral type glass coil internally at bottom. A double wall coiled condenser has standard ground glass joints. Complete with glass fitting, metallic stand, rings clamps and electrical fittings. The unit supplied is as per NPL patent design. To work on 220/230 volts A.C. supply.

Our distillations plants are ideally used in various laboratories for procuring A-1 grade distilled water for various laboratory applications . The output water is absolutely pyrogen free and ideal for practically all the laboratory application.

Most useful for pH and redox potential measurements, supplied with slope correction facility.

• Display : 4 digit
• Range : pH = 0 to 14 pH continuous, mV = 0 + 1999 mV
• Resolution : pH = 0.01 pH, mV = 1mV
• Accuracy : pH = 0.01 pH (Relative), mV = 0.1 % + 1 digit
• 0 Temp. Compensation : 0 100 C (Manual)/(Automatic)

Supplied complete with combined pH electrode with Gold Plated BNC Connector, Two plastic bottles, and electrode stand and instruction manual.
To work on 220/230 V A.C.

Display 4 digits LED, Range 0 to 200 micromhos, 2 millimhos, 20 millimhos, 200 millimhos & 1000 millimhos cell constant compensation from 0.01 to 2.0 readable on digital display automatic temp. Co-effient compensation 0 to 700C supplied with conductivity cell, electrode stand, instruction manual and dust cover S uppl i ed complete with electrode and standard solutions.

Display 4 digits LED, Range 0 to 200 micromhos, 2 millimhos, 20 millimhos, 200 millimhos & 1000 millimhos cell constant compensation from 0.01 to 2.0 readable on digital display 0 automatic temp. Co-effient compensation 0 to 70 C supplied with conductivity cell, electrode stand, instruction manual and dust cover. Supplied complete with electrode and standard solutions.

Based on advance electronic technology for water analysis, pollution control, laboratory analysis, soil testing etc. Complete unit is housed in a briefcase to work on battery rechargeable cum mains. Unit is supplied without O.R.P. electrode with instruction manual.

Digital single and dual channel Flame Photometers with sodium and potassium filters, working on the principle of Flame Emission Spectroscopy (FES) or Flame Photometry . With Sodium (Na) & Potassium (K) filters, 3 point calibration, direct readout in ppm & meq/I, auto filter selection, 5 digit LED display with compressor and other accessories for lab & medical use.

Digital Spectrophotometer is an economical, reliable, rugged and most accurate system for spectrophotometer analysis of any concentration. It operates at a wavelength range of 340 to 960nm. The output is available on a 3½ digit LED display in terms of Optical Density, Percentage Transmission and concentration.Highly advanced solid state I.C. technology has made its circuit very stable and accurate. Rotating disc makes the calibration extremely simple. Desired wavelength can be selected by adjusting the disc provided at the top panel.Range 340-960 nm with facility for Automatic Concentration, % Transmission & O.D. measurement. 3 ½ digit display. Separate 3 digit display for wavelength in nm with 1 nm 20 We reserve the right to change photos & specifications without any prior notice Digital.

For Reliable & Highly Accurate De t e rmi nat ion of Absorban c e , Transmission & Concentration of Liquids. Range 190 to 1000 nm with facility for automatic concentration, % Transmission & OD measurements. Motorized micro controller based wavelength selection, 4 digit LED display for wavelength, 3 ½ digit LED data display with 4 sample holder.

Designed for continuous shaking of solutions in Erlynmeyer Flasks from 50 ml to 1000 ml capacity. It is a compact bench type tabletop model double platform (one on top of the other) fitted with rubber discs. Complete unit is mounted on a heavy and sturdy angle iron frame. For units fitted with A.C. motor speed is controlled by belt driven mechanical speed controller. For units fitted with D.C. drive speed is controlled by solid state continuously variable speed controller. Standard Platform sizes: 55 x 55cm, 65x65cm, 105x105mm, 180x180mm

Complete with 4 flasks holder, one test tube holder stand and sieves holder. To work on 220 / 230 volts 50 cycle A.C. only. Optional Accessories Automatic 0 60 minutes "German Timer"

Used for V.D.R.L. Tests, blood-grouping tests, and various agglutination tests or for mixing of solutions in small bottles flasks or beakers. It has a platform of size 300x300 mm. and can accommodate blood bottles slides or flask using a spring holder. Supplied complete with cord and plug to work on 220/230 volts A.C

Designed to carry up to 7 sieves of 8” dia it is driven by 1 / 4 HP electric motor, through reduction gear. The whole gear mechanism, which gives circular end-to-end motion, runs in an oil bath. The tapping motion is given by hammer from top. To work on 220/230 volts single phase A.C. Supplied complete with adaptor for 8” sieves but without test sieve

Designed to carry up to 7 sieves of 8” dia it is driven by 1 /4 HP electric motor, through reduction gear. The sieve table does not rotate but is inclined from the vertical axis direction. In addition to the Gyrator motion of the table, there is an upward and downward movement ensuring that each square inch of the sieve is utilized. The whole gear mechanism runs is an oil bath. To work on 220/230 volts single phase A.C. Supplied complete with adaptor for 8” sieves but without test sieves.

Fitted with a FHP motor. It can accommodate six sieves of 6” to 8” dia. Speed can be regulated through a continuously variable speed regulator fitted to the unit. To work on 220/230 volts A.C.

A rigid and heavy stand for perfect stability on Horse shoe 0 base with observation tube inclined at 45 and rotatable in 0 360 with perfectly centered quadruple revolving nose piece, fixed stage with precision. Co Axial Mechanical stage with graduated scale and vernier on both sides fitted with sub stage bright field condenser NA 1.3 Achromatic objectives (5x, 10x45x and 100x) Hygenian Eye pieces (H5xand WF 10x) supplied in wooden cabinet

Having heavy duty ball bearings quadruple revolving nosepiece. Fixed stage with precision mechanical stage for x and y movement of slide upto 50 x 75 mm. Built in base HALOGEN ILLUMINATION system 6V-20W. electrical system and regulator, also provided with plans, concave reflecting mirror attachment for day light use. Achromatic Objectives ( 5x,10x 45x and 100x) Eye Pieces ( 5x 10x WF) Supplied in wooden cabinet with lock and key of

Having heavy duty ball bearings quadruple revolving nosepiece. Fixed stage with precision mechanical stage for x and y movement of slide upto 50 x 75 mm. Built in base HALOGEN ILLUMINATION system 6V-20W. electrical system and regulator, also provided with plans, concave reflecting mirror attachment for day light use. Achromatic Objectives ( 5x,10x 45x and 100x) Eye Pieces ( 5x 10x WF) Supplied in wooden cabinet with lock and key of thermocol with trinocular head

Inverted binocular Microscope for tissue culture examination having coarse and fine adjustment , incident lamp with variable light control arrangement, straight tube for photomicrography, with long working distance objectives and binocular head, complete with following optics in box. LWD Objectives (5x, 10x 20x 40x) Wide Field Eye pieces (10x (Paired).

A latest three dimensional zoom Binocular Microscope with special high eye point wide field eye pieces 10x and 15x. Para focal zoom, objective of 1x,10x,5x providing continuous variable magnification from 10x to 150x depending upon the eye pieces and supplementary lens used, having well designed pole stand having extension pilar 0 360 revolving zoom binocular head and 6 volts 20 watts incident spot light illuminator with variable light control transformer Without supplementary lens attachment.

Measuring the light and its intensity and then determining the correct exposure for microphotography is no problem when using the Micro attachment. When fitted, the Micro attachment tube is inserted into the ocular tube of the microscope or microphotographic unit. After the ocular lens is removed, direct readings can then be made through the microscope or microphotographic unit.

Having a table-clamping device with a feed range of 5-40 microns in step of 5 microns each. Based on the principle of freezing with the evaporation of CO2 cylinder around the specimen. The unit is supplied complete with freezing attachment with specimen stage of 32 m.m. dia, gas pipe, one knife of 120 m.m. with back and handle in case of honing stone. Supplied without CO2 gas cylinder.

It has a front located feed indicator with CAM DRIVE SYSTEM setting from 1-50 microns in steps of 1 micron each. The object clamp takes specimen upto 32 x 27 m.m. on stem of block holders. The cutting angle is adjustable through 30 degrees Two levers are provided for releasing knife holder for resetting angles and a third lever releases the entire assembly for movement on side ways to adjust horizontal distance from object. Supplied with one knife of special alloy steel 120 m.m. long with back and handle in box, 3 block holders, one honing stone, one bottle of lubrication oil and dust cover.

Easy Lid lock, Stepless speed regulator, Safety Fuse, Elegant front panel. With a wide choice of rotor heads and adaptors, this unit is truly versatile

This range of centrifuges are designed for high speed centrifuging applications. The equipment is provided with speed control, digital temperature control cum indicator, digital timer with a range of 0-99 minutes and alarm at automatic switching off, dynamic brake, zero start interlock, safety cut off in case of imbalance and lid locking switch etc.AA

Multipurpose Centrifuge t hat accommodates a large number of Rotor Heads of varying tube capacities. The Table-top model centrifuge is provided with step less auto variac speed control and with separate control panel having digital speed indicator, digital Timer of 0- 99 minutes and automatic switching off, alarm signal, digital temperature control cum indicator with a range of -10 o c to +40 o Cc. The equipment also feature dynamic brake, zero start inter lock, safety cut off in case of imbalance and lid

This range of centrifuges are environment friendly equipment provided with CFC free cooling system, Brushless induction motor, Programmable microprocessor control for pre-setting speed in the range of 100 to 20000 RPM, RCF Display, Temperature ranging from -10oC to +40oC, Timer with a range of 1 minutes to 120 minutes and Acceleration/Deceleration time. Functional displays on the LCD while in running mode include RPM Indication by default, RCF by selection, remaining time, working chamber temperature, lid lock status, rotor

Three models according to bath volume (5L, 10L, 20L) Temperature range from ambient +5 c above ambient to 100c PID microprocessor controller (touch pad type) achieves accurate temperature control Memory to store three temperature setting and single button to activate required set temperature. Temperature unit display readout: Celsius of Fahrenheit Lock function protects setting value from unintentional changes

It is a double walled unit with inside made of thick S.S. sheet and outer of M.S. sheet duly enamel painted. The pyramid cal lid made of S.S. prevents falling of condensed water droplets on the specimens. Heating is achieved through a immersion type heater and the temperature is controlled by “IMPORTED THERMOSTAT” hydraulic type thermostat with an accuracy of + 0 0.5 C. The bath has an oscillating tray riding on ball rollers oscillated through a geared variable speed motor. Shaking speed range is between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or erlenmeyer flasks of 25 ml or 50 ml or 100 ml or 250 ml or 500 ml

Double walled with inside made up of S.S. and outside of M.S. sheet duly enamel painted. The gap between the two walls is filled with high-grade glass wool to minimize thermal 0 0 0 loss. Temperature range from 50 C to 250 C ± 2 C, is controlled by “IMPORTED THERMOSTAT” hydraulic capillary type thermostat. A variable speed stirring arrangement is fitted to the unit for maintaining temperature with card and plug to work on 220/230 volts A.C. supply.

It is a double walled bath with inner chamber made of stainless steel and outer wall made of M.S. sheet duly enamel painted. The gap between outer and inner walls is filled with special grade glass wool insulation.The concentric rings, can be removed to accommodate containers of 0 0 various sizes. Temperature from ambient to 10 C ± .1 C is con t rol led by “ Imported Thermostat ” Sixe: 300 x 250 x 100 mm ( 6 holes of 75 mm dia) 355 x 405 x 100mm (12 holes of 75mm dia)

These units are double walled with inner chamber made up of S.S. sheet and outside of M.S. duly enamel painted. The gap between the walls is filled with special grade glass wool in order to avoid thermal losses, a drain plug is also fitted to the unit. The inner chamber fitted with immersion type heating element is covered with perforated removable diffuser tray. The cover is provided with the unit as a standard accessory. Temperature from 0 ambient to 100C is controlled by “Imported Thermostat” 0 hydraulic capillary type thermostat with an accuracy of ± 1C. Cap: 2racks/4 racks/6 racks/8 racks.

Double walled chamber has inner made up of thick S.S. and outer wall is of thick PCRC sheets duly enamel painted. A glass window is provided on the front side for an easy inside view. A high-speed stirrer with a motor of 1/20 H.P. is fitted to the unit for continuous stirring and thus maintaining a uniform temperature throughout. A speed regulator is provided on the front panel to control speed of the stirrer. The heating mechanism comprises of set of heaters a 0 0 sensitivity of 0.1 C ± 1 Digit, from ambient to 100 C. Available in different standard capacity and models.

Features: Large LCD display for easy view., Standard RS 232 interface., Parts Counting & percent weighing., Below balance weighty facility.,Die cast aluminum design for long term stability & accurate result. Various weighing units like ct, gm, oz, dwt, mom, GN.ISO-GLP compliance printouts (optional) Available in various models and capacity.

For rapid laboratory quality moisture determinations at a touch of a button, th halogen moisture balances set the standard. Using controllable halogen heaters, moisture is gently but rapidly driven off from the sample. The integral quality balance and onboard computer calculate the weight loss giving accurate measurements within minutes. Using intelligent design and high quality parts; repeatability of 0.01% is achieved.The range offers three instruments, with varying degrees of sophistication.

These scales feature a configuration where the platform is separated from the weighing indicator via a cord 5 feet or more in length. The weighing capacities range from 6 lb to 2000 lbs. Some models feature a stainless steel platform, while others or washdown scales perfect for the restaurant marketplace. Applications also include general shipping. Available in different models and capacity